Gobal WebSites:

A Conference About Stone Powder Making Machine In Clirik

Date:2014-11-12 09:51:39    From:    Click:
A Conference About Stone Powder Making Machine In Clirik
 
A conference was held yesterday in Clirik negotiating the production of the Stone Powder Making Machine. This conference was a successful meeting to solve the problem in Stone Powder Making Machine production. More or less, it is about the technical problem in the machine production.
 
First, the conference mentioned about how to enable the air flow to transport the super fine powder. All the experts expressed their opinions and solutions about the issue. At last, Mr Zhang who was the main academician in china central science club came out with a feasible solution to solve the problem. Below is his suggestion.
 
The high-pressure air blower constantly inhales air within the Stone Powder Making Machine and, in turn,  the airflow with crushed materials are brought to the classifier whose high-speed impeller will screen the airflow: the unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall and exit from the discharging valve at the bottom; a small proportion of the fine powders, with airflow, moves to the dust cleaner, and clings to the surface of the filter bags. At the same time, the fine powders clinging to the surface fall down by the sudden vibration of the filter bags, which is caused by the instantly ejected high-pressure gas controlled by the pulse valve. The materials from the above two lots are sent by the conveyor at the bottom to get finished powders packed. In addition, filtered clean air will be emitted from the air outlet of muffler in the end.
 
 http://www.stone-mills.com/products/stonemills/6.html
 
This is definitely a brilliant design because this unique technique has never been used in any machine before. With this technique, Clirik’s machine is able to be dust free and acquire twice efficiency than usual machine in the world.
 
What’s more. When the Stone Powder Making Machine is at work, all the grinding rollers are rolling in the ring, and the materials are driven to the edge of the turnplate by the centrifugal force and fall down into the grinding chambers where the materials are repeatedly pressed, crushed and grinded by the rollers. This procession make was more fluency and smooth than usual.
 
This solution by Mr Zhang took in other excellent experts’ advice, making itself much more perfect.
 
Therefore, this is a successful solution conference in Clirik.