Gobal WebSites:

Processing Gypsum with Grinding Mill

Date:2014-11-14 11:36:50    From:    Click:
Gypsum is an ordinary material seen in everyday life. It is a soft sulfate mineral composed of calcium sulfate dihydrate, with the chemical formula CaSO4·2H2O. It can be used as a fertilizer, is the main constituent in many forms of plaster and is widely mined. Early in ancient times, gypsum has been used in sculpture already.
How to Processing Gypsum with Grinding Mill?
After crushed by hammer crusher, the large Gypsum granula become small ones and are sent to storage hopper by elevator, and then evenly sent to the upper distribution plate of the turnplate by vibrating feeder and sloping feeding pipe.
When the 6-47 micron HGM100 Gypsum Pulverizing Machine is at work, all the grinding rollers are rolling in the ring, and the materials are driven to the edge of the turnplate by the centrifugal force and fall down into the grinding chambers where the materials are repeatedly pressed, crushed and grinded by the rollers.
Then, the high-pressure air blower constantly inhales air within the 5-47 micron HGM100 Gypsum Pulverizing Machine and, in turn, the airflow with crushed materials are brought to the classifier whose high-speed impeller will screen the airflow: the unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. 
Finally, it is a complicated procedure to process the machine with Gypsum Grinding Mill. Let’s go on the explain it, next, most of the qualified powders will fall and exit from the discharging valve at the bottom; a small proportion of the fine powders, with airflow, moves to the dust cleaner, and clings to the surface of the filter bags. At the same time, the fine powders clinging to the surface fall down by the sudden vibration of the filter bags, which is caused by the instantly ejected high-pressure gas controlled by the pulse valve. The materials from the above two lots are sent by the conveyor at the bottom to get finished powders packed. In addition, filtered clean air will be emitted from the air outlet of muffler in the end.
After all the procession above, the gypsum powder is made out from big chunk gypsum stone already. The machine is delicate, intricate and high efficiency. However, the operation is simple and the machine is easy to handle. Maintenance is also guaranteed by the provider, Clirik. The customer will never need to worry about the problem then. The only thing they need to do, is to take the powder and sell it for big money.