How should we do when stone powder machine does not properly start

Usually in the production process, start stone powder machine is a fixed program starts, you should first check that all access doors are tight, whether there is debris inside the machine, adjust the fan and host of steering, then check whether the device is in the exhaust valve the fully open position, check for loose screws. 

 

After doing all the preparation in accordance with: 'Start' Hoist - Crusher - Analytical Engine - Fans - Host - feeder smoothly turn on the machine. But if the device does not start, then start the program in accordance with the normal will cause some damage to it, and if you did not do troubleshooting, debris entering into the machine, the exhaust valve does not open, the stone powder machine will result in the work process due to overload or objects blocking material fouling death card, the device is turned upside down smoothly and some human factors can also cause harm to the mill and stone powder machine.before you start to determine the voltage stability is also very important, the voltage is lower than the rated motor voltage, but not too much lower than the rated voltage, otherwise, there will be voltage instability phenomenon at work when the stone powder machine equipment will burn equipment. Also prohibited in the device during operation of any adjustment, cleaning or maintenance work is prohibited in operation peep from the upper part of the machine milling chamber toward the machine.

 

If you encounter difficult problems in using the stone powder machine process, welcome to call to consult us.