Gobal WebSites:

Which limestone mill is used to process 500-600 mesh of limestone with a productivity of 5-6 t/h?

Date:2021-05-19 16:11:19    From:    Click:
Today CLIRIK received manager Liu from Anshun, Guizhou. Manager Liu is preparing to build a limestone grinding project in Guizhou. It is necessary to process limestone with a mesh fineness of 500-600, 5-6 tons per hour. So which car is best for this project?

Manager Liu visited the factory and showroom under our guidance. He has a great interest in our micro grinding mill. HGM100L micro limestone grinding mill was recommended by sales engineer Mr. Tao based on customers' requirements.
limestone processing project customer visit clirik showroom
Limestone processing project customer visit CLIRIK showroom

Parameters of HGM100L limestone mill:

  • Product Name: CLIRIK HGM Micro Powder Grinding Mill for Limestone
  • Model: HGM100L
  • Processing material: limestone
  • Feed size: less than 20mm
  • Discharge size: 74-5 microns (200-2500 mesh)
  • Production: 1.2-10 t / h
  • Working diameter: 1000 mm
  • Number of grinding rings: 4 layers
  • Number of grinding rollers: 28-36pcs
  • Size: 22.7 * 3.6 * 8.5m

Note: Due to the number of rolls, the HGM100L ultrafine mill is also called 28 roller grinding mill.
Limestone grinding mill

Applicable materials of HGM100L limestone mill:

In addition to limestone, HGM100L is also suitable for many other materials.
It is mainly suitable for ultrafine powder processing of non-flammable and explosive brittle materials with medium and low hardness, Mohs hardness ≤6, such as calcite, gypsum, limestone, dolomite, carbon black, kaolin, bentonite, talc, mica and diamond Mineral magnesium, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomaceous earth, barite, gypsum, alunite, graphite, fluorite, rock phosphate, potassium ore, pumice stone, etc. There are more than 100 kinds of materials, the fine powder granularity can be adjusted between 325-3000 mesh, and the output can reach 0.7-7.5 tons per hour.
HGM100L limestone mill applicable materials

Composition of HGM100L Ultra Fine Limestone Mill Equipment:

Limestone Pulverizer: A full set of stone processing equipment including hammer crusher, bucket elevator, storage tank, vibrating feeder, micro-grinding host, frequency conversion classifier, dual cyclone dust collector, pulsed dust removal system, high pressure fans, air compressors control systems.

The principle of operation of the ultrafine limestone mill HGM100L:

While working, the main motor drives the main shaft and the turntable to rotate through the gearbox, and the roller pins on the edge of the turntable drive dozens of grinding rollers to roll on the grinding ring track.

Large pieces of material are crushed into small particles by the hammer crusher, then sent to the storage container by the elevator, then through the vibrating feeder and the inclined feed tube, the materials are evenly sent to the bulk tray. turntable.

The material spreads to the periphery of the circle under the action of centrifugal force, falls on the grinding ring track and is impacted, rolled and ground by the ring roller. After processing the three-layer ring, it turns into powder. The high-pressure fan sucks in the outside air via suction, inhales into the machine and carries the crushed material to the dust concentrator.

The rotating impeller in the dust concentrator causes the coarse materials to shrink and re-sharpen. The fine dust that meets the requirements enters the cyclone dust collector with the air flow and is discharged from the exhaust valve at the bottom of the cyclone as a finished product. The air stream with a small amount of fine dust passes after the pulse dust collector is purified, discharged through a fan and silencer.

Shanghai Clirik Machinery Co., Ltd. specializes in manufacturing various types of limestone grinding mills. In addition to providing high quality products, we also provide thoughtful services: such as material testing, production line planning, customer airport transfers, door to door installation reminder and parts replacement Please wait.
If you have any further questions about limestone milling, please leave a message and request online.
Email: sales@clirik.com
WhatsApp: +8613512155195 / +8613917147829