Product Center
Today News
Kaolin Clay Stone Powder Grinding Mill-CLIRIK Machinery
Date:2021-11-17 19:32:25 From: Click:Kaolin Clay
Kaolin clay also name kaolin, it is a non-metallic mineral, a kind of clay and clay rock dominated by kaolinite clay minerals. Because it is white and delicate, it is also called white cloud soil.
Kaolin clay
Kaolin can be widely used in industries such as papermaking, ceramics, rubber, chemicals, coatings, medicine and national defense. At present, all applications of kaolin must be processed into fine powder by a milling machine before it can be added to other materials to be fully integrated.
Application field of kaolin clay stone powder grinding mill
Kaolin powder grinding mill is also called HGM series ultrafine mill, which is an important kaolin processing machine. In addition to kaolin, it is also suitable for the grinding of a variety of non-metallic minerals with a hardness of less than 6. For example, limestone, dolomite, barite, bentonite, marble, calcite, gypsum, etc.
The kaolin powder grinding mill is a new type of mill developed by CLIRIK based on the material properties of non-metallic minerals. It has the characteristics of mature and reliable technology, simple process flow, and complete specifications of the finished product. The equipment is not only used to process kaolin, but also to process calcite, barite and other stone materials, with a processing fineness of 200-2500 mesh.
Working principle of kaolin powder grinding mill
1. When working, the main motor of the Kaolin powder grinding mill drives the main shaft and the turntable to rotate through the reducer, and the roller pins on the edge of the turntable drive dozens of grinding rollers to roll in the ring raceway.
2. The kaolin raw mineral material is crushed into small particles by a hammer crusher, and then sent to the storage bin by the elevator, and then through the vibrating feeder and the inclined feeding pipe, the kaolin particles are evenly sent to the bulk material on the upper part of the turntable On the disk.
3. The kaolin particles are scattered to the periphery of the circle under the action of centrifugal force, and fall into the raceway of the grinding ring and are impacted, rolled, and ground by the ring rollers. After three-layer ring processing, they become kaolin powder. The high-pressure fan sucks The outside air is sucked into the machine, and the crushed kaolin powder is brought into the classifier.
4. The rotating impeller in the classifier makes the coarse kaolin powder fall back and regrind, and the fine powder that meets the requirements enters the cyclone powder collector with the airflow and is discharged by the discharge valve at its lower part, which is the superfine kaolin powder with a small amount The airflow of fine dust passes through the fan and muffler after being purified by the pulse dust collector.
Kaolin powder grinding mill structure
Kaolin powder grinding mill customer site
Performance advantages of Kaolin powder grinding mill
1. Long service life of wearing parts: the grinding roller and grinding ring are forged with special materials, which greatly improves the utilization. In the case of the same fineness of materials and finished products, the service life is 2-5 times longer than the wear parts of impact crushers and turbo crushers, generally up to more than one year. When processing calcium carbonate and calcite, the service life can reach 2 -5 years.
2. Low investment cost: Because it integrates crushing, drying, grinding, and grading and conveying, the system is simple, the layout is compact, the area is about 50% of the ball mill system, and it can be laid out in the open air, so it can greatly reduce the investment cost.
3. Stable product quality: Because the material stays in the mill for a short time, it is easy to detect and control the particle size and chemical composition of the product, reduce repeated grinding, and stabilize the product quality.
4. High grinding efficiency: The grinding roller is used to directly grind the ground material on the grinding disc, which has low energy consumption and saves energy consumption by 30%-40% compared with the ball milling system.
The configuration of a complete set of kaolin grinding production line needs to be combined with the needs of users. For specific details, please consult our technicians!
Technical parameters of Kaolin powder grinding mill
Parameters of Kaolin Powder Grinding Mill | |||||||
Model | HGM80 | HGM80A | HGM90L | HGM100L-Ⅱ | HGM100P | HGM125L | HGM1680L |
Ring Diameter(mm) | 800 | 800 | 900 | 1000 | 1000 | 1250 | 1680 |
Ring Number (PCS) | 3 | 3 | 4 | 4 | 4 | 4 | 4 |
Input Size (mm) | ≤10 | ≤10 | ≤10 | ≤15 | ≤15 | ≤20 | ≤20 |
Output Size (mesh) | 150-3000 | 150-3000 | 150-3000 | 150-3000 | 150-3000 | 150-3000 | 150-3000 |
Capacity (t/h) | 0.5-5.5 | 0.5-5.5 | 0.8-6.5 | 1.2-10 | 1.2-11 | 2.5-20 | 5-45 |
Outlet Size L*W*H (mm) | 8605*4139*6050 | 10454*3393*6626 | 11735*3952*7525 | 14507*3633*7562 | 14362*4200*7562 | 19261*4406*8591 | 25067*5414*9007 |
Main motor power (kw) | 75 | 75 | 55*2 | 132/75*2 | 132/75*2 | 185 | 315 |
Who we are?
Shanghai CLIRIK Machinery Co.,Ltd. has been committed to the field of ultra-fine powder grinding machines for 20 years.CLIRIK has a first-class manufacturing base with standardized and intelligent production lines.
CLIRIK's professional R&D, sales, installation and after-sales teams have provided door-to-door services to more than 100 countries and regions.
Which models can be selected for processing ultra-fine powder?
HGM grinding mill: 74-5 micron(200-2500 mesh); D97=5 micronYGM Raymond mill: 613-33 micron(30-325 mesh); D90=30 micron
CLUM vertical roller mill: 20-5 micron(600-3000 mesh); D50=2 micron D97=4 micron
How to get the latest quotation?
You can leave a message online or contact CLIRIK directly:Email: sales@clirik.com
WhatsApp: +8613512155195/+8613917147829