Gobal WebSites:

Calcination talc stone powder grinding machine


Calcination talc stone powder grinding machine, which is designed by our engineers and technicians on the basis of multiple innovation, test and experience over two decades, has absorbed many advantages of home and abroad mill manufacturing technique. It has been proved by thousands of customers that our machine has outstanding features and stable quality. CLIRIK Stone grinding mill; stone ultrafine mill can upgrade its production and the additional value which is suitable for our customer to use. It is the ideal equipment for fine milling.
  • Product Center
inquiry

 Calcination talc stone powder grinding machine, which is designed by our engineers and technicians on the basis of multiple innovation, test and experience over two decades, has absorbed many advantages of home and abroad mill manufacturing technique. It has been proved by thousands of customers that our machine has outstanding features and stable quality. CLIRIK Stone grinding mill; stone ultrafine mill can upgrade its production and the additional value which is suitable for our customer to use. It is the ideal equipment for fine milling. 

 

Working principle of  Calcination talc stone powder grinding machine

●The crusher will crush the big materials into small ones, and then the elevator will send them to the hopper.

●The vibrating feeder will send the materials to the middle of first dial evenly.

●The motor of main equipment drives the main shaft and dial through reducer, and the dial drives numbers of rollers moving in the ring channels via pins.

●The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings.

●The high pressure centrifugal blower will inhale air from outside and bring the crushed materials to classifier.

●The rotating turbo in the powder collector will make the coarse materials return to the mill and regrounded, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it.

 

●The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.

 

Features and advantages of  Calcination talc stone powder grinding machine

● High Efficiency 

Under the same finished final size and the same motor power, the capacity of Fine roller mill is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.

● Long lifecycle of spare parts

The ring and roller are forged by special material with high utilization. Under the same grinding material and finish special size, the lifecycle of spare parts is about one year, which is 2-3 times longer than impact mill or turbo mill. Furthermore, the lifetime can reach 2-5 years for grinding calcite carbonate.

● High safety and reliability

As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.

● High fineness, flexible adjustment

The final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97≤5μm.

●Environment-friendly 

The application of pulse bag filter and muffler greatly alleviates dust pollution and noise.

●Advanced intelligent speed control device

Convenient adjusting, more uniform particle size.